Guang Yuan Technology (HK) Electronics Co., Limited
Guang Yuan Technology (HK) Electronics Co., Limited Energy Saving; Enviroment Protection; High Efficiency; Safety
Add to Cart
Saw Blade Brazing High Frequency Induction Heating Machine 60KW
Induction brazing is often used in higher production runs. It produces uniform results and is very repeatable. There are many types of industrial equipment where induction brazing is used. For instance, Induction is used for brazing carbide to shaft.
| Model | GY-60AB (Three phase) |
| work power | 340V-430V |
| input current | 60A |
| Fluctuating output power | 60KW |
| fluctuating frequency | 30-80KHZ |
| output current | 400-2400A |
| the flow rate of cooling water | 0.08-0.16Mpa 7.6L/Min |
| water temperature protection point | 40C |
| product size | main : 640x280x550 mm |
| transformer : 510x260x410 mm | |
| net weight | main : 37.5 kgs |
| transformer : 32.5 kgs |
Delivery Time: within 3 workdays.
Shipping Term:By sea,By air,by express.
Extra accessories accept choose
1>Chiller
2>Customer design Coil
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace,Melting Furnace,Hardening Fixture
Scope of induction heating application
1. Adopt MOSFET. High frequency, energy saving and steady.
2. Heating speed is fast and high efficiency.
3. Only heat the part inside the coil, little distortion.
4. Short heating time. There is no oxide layer on the surface of the workpiece.
5. Easy operation, good working environment and no pollution.
6. Control heating temperature and heating time easily. Ensure heating quality and could achieve line production.
Our services
1).Pre-sale service:
1.Inquiry and consulting service
2.recommend the most suitable for our customers according to their requirements
3.Sample testing support
4.working videos available
5.View our factory
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
Induction heating is often used in the heat treatment of metal items. The most common applications are induction hardening of steel parts, induction soldering/brazing as a means of joining metal components and induction annealing to selectively soften an area of a steel part.
Induction heating can produce high-power densities which allow short interaction times to reach the required temperature. This gives tight control of the heating pattern with the pattern following the applied magnetic field quite closely and allows reduced thermal distortion and damage.
This ability can be used in hardening to produce parts with varying properties. The most common hardening process is to produce a localised surface hardening of an area that needs wear-resistance, while retaining the toughness of the original structure as needed elsewhere. The depth of induction hardened patterns can be controlled through choice of induction-frequency, power-density and interaction time.
Limits to the flexibility of the process arise from the need to produce dedicated inductors for many applications. This is quite expensive and requires the marshalling of high-current densities in small copper inductors, which can require specialized engineering and "copper-fitting."
CALENTAMIENTO P/INDUCCION,HORNO DE INDUCCION,MAQUINA DE CALENTAMIENTO
LOS DEMAS APARATOS PARA TRATAMIENTO TERMICO DE MATERIAS POR INDUCCION O PERDIDAS DIELECTRICAS